Quantcast
Channel: M-Series Controller Forum - Latest topics
Viewing all 1749 articles
Browse latest View live
↧

Changement gobos sur Rush Scanner Led 1

January 3, 2018, 6:01 am
$
0
0

@Kempai wrote:

Bonjour,
J'ai à remplacer un gobo sur un Martin Scanner Rush Led 1 : l'accès est très difficile et je me demande si je n'ai pas loupé queqlue chose dans la manipulation a faire. Est-il possible de retirer la roue crantée dans laquelle se loge le gobo ? Ou le seul moyen est-il de parvenir a retirer l'anneau en métal qui le maintient dans son emplacement ?
Le soucis étant que cette dernière manipulation me semble très compliquée sans abîmer la surface "mâte" du gobo.

Cordialement,

Posts: 1

Participants: 1

Read full topic

↧
Search

Mobiltech truss (290) compatibility with global F33

January 3, 2018, 12:07 pm
$
0
0

@Giglight wrote:

Hi

As an audience of industry users perhaps one of you has come across this.

I have a pile of Mobiltech 290 Tri Truss (50mm tube).

I need more but mobiltech got bought out by various companies including global.

Pictures look like it's identical but has anyone actually tried it together?

Posts: 1

Participants: 1

Read full topic

↧
↧

What Happend????

January 4, 2018, 10:45 am
$
0
0

@Jirwind wrote:

Ok, everything is official, Matthias is out, paul is out, belgium was Closed. is the End of M-Series? when we have any information about this, what happend now with the developer, with the support? with the customers?

in Haman/samsung someone thinks about this??

is very Sad, Martin was the number one, and aftfer Harman, Martin is Over

Thanks Harman for destroy a solid lighting company

Posts: 2

Participants: 2

Read full topic

↧

APC 20 Mode 2 - Please help!

January 4, 2018, 1:12 pm
$
0
0

@mjcala wrote:

Trying to send the midi sysex command to an apc 20 to put in mode 2 and use with mpc tools. I've tried using midi OX and mpc tools to do so with no luck. Someone please help!

Screenshots would be greatly appreciated.

Posts: 1

Participants: 1

Read full topic

↧

Import failure

January 4, 2018, 10:20 pm
↧
↧

Virtual Dimmer Info

January 5, 2018, 1:54 pm
$
0
0

@MMSTom wrote:

Currently there doesn't appear to be any info on the M-Series controller support site explaining the virtual dimmer function and how it works. When I search virtual dimmer, it turns up "DMX Input", "Commandline Reference", and "Downloads". Is there a section explaining the virtual dimmer? If not please add one.

Posts: 2

Participants: 2

Read full topic

↧

M-PC not working after Windows 10 Updates

January 7, 2018, 6:45 am
$
0
0

@krbrande wrote:

One of the latest Windows 10 updates appears to be causing M-PC software to not work. We've verified this by uninstalling the patch. This is the 2nd update that has caused a problem. Anyone else experiencing this and any suggestions?

Posts: 5

Participants: 5

Read full topic

↧

Cuestacked Chases

January 8, 2018, 1:37 am
$
0
0

@cyeomans wrote:

Hi all,

I have a cue stack of chases triggered via macros. The cuestack is assigned to a fader. Is it possible for the fader to control the intensity values of all the chases? At the moment I am using fixture inhibits to control intenities. Thanks

Posts: 1

Participants: 1

Read full topic

↧
Search

Warning! Windows 10 Security Update KB4056892 blocks M-PC output!

January 8, 2018, 2:25 am
$
0
0

@Ofer_Brum wrote:

Hello Everyone,

As from yesterday, 07.01.2018, please notify, that latest MS Windows Update KB4056892, will block M-PC outputs

The above seems to be relevant, to all M-PC devices:
- M2PC
- M-Touch
- M-Play
- M-DMX
- ENTTEC USB
- ArtNet devices

You will need, to remove the KB4056892 update, from your PC, using the below steps

  1. Click the Windows icon, and click the Settings icon

1.png392x640 158 KB
  1. Click Update & Security:

2.png1280x978 19.5 KB
  1. Click the View installed update history option

3.png1280x978 30.6 KB
  1. Click the Uninstall updates option:

4.png863x464 13.5 KB
  1. Right click the KB4056892 item, from Microsoft Windows list, to unistall

5.png694x458 19.7 KB
  1. When done, go to Advanced options, and enable Pause Updates

6.png765x636 17.3 KB

7.png1280x978 28.7 KB

Posts: 3

Participants: 2

Read full topic

↧
↧

Where are the default presets?

January 9, 2018, 4:14 pm
↧

APC40 LED Color Response - HOW ?

January 9, 2018, 6:06 pm
$
0
0

@Transporter wrote:

Hello,
i know its Martin fourm, but I heard all the lightning experts are here.
Im using MA Dot2 and I want APC40 to color respone, when I hit a button, I want it to blink led.
How do i make it happen ? any youtube video or something?

Thanks

Posts: 2

Participants: 2

Read full topic

↧

'Content' highlight on Live output

January 9, 2018, 7:46 pm
$
0
0

@lightguy48 wrote:

It would be nice to have the ability to have the content/values of a selected playback highlighted on the Live Output

I know there is the Origin option but this is so verbose it's difficult to find what you're looking for, literally a needle in a haystack. Plus the Origin button masks the values of that playback.

One brand of console (maybe others) allow you to highlight the values of the selected playback so that it makes it easy to see what parameters in the Live Output are actually coming from that playback (i.e. what hasn't been overidden or stomped by other playbacks)

Posts: 1

Participants: 1

Read full topic

↧

MPC slows down after running a while

January 10, 2018, 9:16 am
$
0
0

@MikeOt wrote:

I have M-PC running on a Lenovo 520 with 256 SSD. When I start the system up it is fine but as time goes on it lags more and more. When I give it commands it can take several seconds to respond after it has been running for an hour or two?
Mike

Posts: 5

Participants: 3

Read full topic

↧
↧

Temporarily invert pan for faster programming

January 10, 2018, 5:04 pm
$
0
0

@crandall wrote:

On MA1, there is an Aiign <> function that allows you to pan two or more fixtures in opposite directions by the same amount. As you adjust pan, half the selected fixtures go clockwise, half go counter - it's a temporary pan-invert that makes it easy to set symmetrical positions (on a symmetrically-built rig). Is there a similar function in the M-PC world?

Posts: 2

Participants: 2

Read full topic

↧

M1 OS Installation Help

January 10, 2018, 9:46 pm
$
0
0

@markhunt wrote:

My M1 console is running 3.44.604 I'd like to update. From the information I gather, I understand this needs to be an OS Installation to get to 3.70 rather than just a firmware update.

I've run through the steps on "Support - Installing the Operating System"
At the point of "OS Install" I've pressed F10 to save and confirm the Hard Disk Boot Priority. But then the Operating System Installation does not launch/show. My console displays the DOS C:> command.

Can anyone help?

Posts: 4

Participants: 2

Read full topic

↧
Search

cannot install M-Series on PC

January 11, 2018, 4:04 am
$
0
0

@Julian_Engels wrote:

Hey guys

I cannot install the Version 3.70.885.0 of M-Series on pc
It says: error 27502 could not connect to Microsoft SQL Server (localdb).\MartinMSeries Login timeout expired (0)

Posts: 2

Participants: 2

Read full topic

↧

M-Touch DMX output 'stuck'

January 12, 2018, 7:22 am
$
0
0

@WdMeaun wrote:

Hello all,

I've been using the M-Touch with M-PC for some time with success but since about a week it started to act up. Regardless of what I try to change, it would always send out to DMX channel 1, 3 and 4. - I do believe I did use that setting at some time.
I can't get the M-Touch to send to any DMX channel at all with the exception of the fixed values to channel 1, 3 and 4.

The M-Touch itself seems to responds perfectly to any touch (passed the diags), tried different USB / DMX cables (signal seems fine), different dimmerpacks, updated the firmware, different (windows) computers.
The DMX values are sent as soon M-PC connects to the panel, regardless of the loaded show, if any.
I am still in research mode, but if anyone has any idea, I would be happy to hear.

With kind regards,
Steve

Posts: 3

Participants: 2

Read full topic

↧
↧

Sketchup Problems

January 13, 2018, 10:32 am
$
0
0

@Justin_McMullin wrote:

Can anybody tell me what I'm doing wrong with this sketch up file I'm trying to import.
For some reason the right hand side is greyed out and doesn't reflect the same as the left hand side. Is it some sort of mask layer ?
And is there any way of getting it to look like the original once its loaded into MSD ? instead of it looking like a primitive CAD drawing.
I don't have the luxury of AutoCAD etc so having to use sketchup.
Cheers peeps

6.JPG1480x728 145 KB
26840846_10155041103741610_7312836013847654254_o.jpg3840x1080 217 KB

Posts: 1

Participants: 1

Read full topic

↧

M6 internal Displayport Cable Replacement

January 13, 2018, 11:04 am
$
0
0

@claytonhubick wrote:

Is there anything special about the displayport cable connecting the internal displays on an M6? My right display is flaking out and speaking with Marion that its likely the displayport cable is damaged and needs to be replaced. I'm assuming its a standard off-the-shelf male to male displayport cable? Any tips and tricks on the least-painful way to change this out?

Posts: 3

Participants: 2

Read full topic

↧

Smart Show NetDMXII - Wont Come Up in MPC

January 14, 2018, 12:34 pm
$
0
0

@Callum_Jack wrote:

Have just got a new Smart Show NetDMXII and can't seem to configure it to work with MPC. I am running it in Artnet mode with the IP 2.0.0.201 and subnet mask of 255.0.0.0 running directly into my pc using a crossover Ethernet cable. I have set my PC to a static IP at 2.0.0.2 and a subnet mask of 255.0.0.0. I have also tired the Artnet override setting in MPC and put the Artnet nodes IP in there and still no luck I am probably missing something simple. Any help would be much appreciated
Thanks in advanced

Posts: 1

Participants: 1

Read full topic

↧
Viewing all 1749 articles
Browse latest View live
Search