@anthonylee wrote:
Hey there just seeing if anyone can help me I have a video raster for led wall. I can’t find any info on how to configure the led wall in msd6.
Help please
Cheers
Ant.
Posts: 1
Participants: 1
↧
How to patch and sync with media server
↧
Kinetic Ball -
@anthonylee wrote:
Hi there I have a show coming up that I need to Per-Vis 300 kinetic balls. Can Msd6 do this ?
I would need to be able to see the balls go up/down also be able to map all the balls so I can see the video content that will be going over them.Cheers
Ant
Posts: 3
Participants: 3
↧
↧
How to make the lights in a chase be out of sync from each other
@KickinMusic wrote:
I'm pretty new to M-pc and have set up a chase cue with 4 colors and have it working, but all the lights come on and change colors at the same time. I want the them to chase how do I do this?
Posts: 6
Participants: 2
↧
All time values in one window on M-Series consoles.
@smootha wrote:
Hello!
I wish, that controlling all time values of cuelist (fade, delay, release) could be managed from one window - it would be much faster. Setting the times takes much time 'cause you should always set release in one window, then close it, open another layout and change fade value.
Posts: 1
Participants: 1
↧
MX Controller has stoped working !!
@Xzone wrote:
Hello,
i have problem with mpc.
After install on new computer with Win10 with every update I install V.3.70.885.0 and when on black screen menu I have to load show app stoped and I see pop up with MX Controller has stoped working.
I try many times use Martin clean software , reboot compter, instal one more time mpc and still the same problem.
Please help.Thx,
Michal
Posts: 1
Participants: 1
↧
↧
about writing the banks in the m-play
@FERNANDO wrote:
HI
I would like in future power to write the banks in the M-play:wave:
Posts: 2
Participants: 2
↧
i have 2 question
@quanghieumobi wrote:
Hi all,
The function RecordCue and RenameCue doesn't accept decimal ID (to create intermediate cue)
Is this can be unlocked please ? (For the moment I workaround it with key commands, but for rename that's not possible)
and the second question
On the playback pages in the ios-remote you can only activate, pause and release the playbacks.
Is there a possibillity to get the custom function in there as well?
Since im mostly using toggle and flash function on the playbacks.
Posts: 1
Participants: 1
↧
Internal Error - can’t initialize the LogDataChangedSynchronizer
@octabrain wrote:
Hi,
I was trying to startup Martin M-PC after not having run it for a while and now I get this error:
Internal Error - Can’t initialize the LogDataChangedSynchronizer
Is there any way to fix that without reinstalling?
Posts: 1
Participants: 1
↧
How do you set the playback higher priority than programmer
@Vikar_Mani wrote:
Is there anyway to make the playback higher priority than the programmer and if not is there a work around that?
Posts: 2
Participants: 2
↧
↧
Fader/Cue Containing Static+Dynamic Actions
@s5events wrote:
If this is already a topic, I apologize. I couldn't find it.
I'm looking to have an override on a fader for a strobe effect with dimmer intensity as an effect. So essentially, as I move the fader up, the dimmer (brightness) increase from 0-100... but... I want a strobe rate to be the same rate regardless of the dimmer intensity level. I'll add that I am using the intensity multiplier function to generate the strobe (I don't know if that is a conflict for what I'm looking to do).
Posts: 2
Participants: 2
↧
FX Multiplier Rate Fluctuates
@s5events wrote:
I've noticed that if I create a strobe effect using an FX multiplier on intensity, the strobe rate is not consistent. I have set the speed to 100% and the swing to the actual full distance... NOT the extended ranges (forget the actual numbers).
I'm looking for guidance on how to to make the rate consistent as well as any suggestions on the best speed/multiplier combinations for a typical club/party strobe rate. Thank you.
Posts: 2
Participants: 2
↧
Lag with Martin M-Touch
@Megakleinhirn wrote:
Hey guys,
the DMX output of my m-touch lags when I'm fading out a fixture (dimmer fade has only 3 "steps", no fade).
I had this problem before, but only when the battery saving mode on my laptop was activated. I turned it of and it worked for a few weeks.
Today I used M-PC again, with this mode turned off, but it lagged again....
Is there anybody with the same problem?Sorry for my bad english
Posts: 5
Participants: 3
↧
Maximum touchscreen taps/hits with one finger
@astey wrote:
Hi guys,
I got a question about Touch screen intervals on Windows 10:
When I want to flash a cue by tapping one finger on the screen, a lot of taps get filtered and only a few hits will be activated. However, Windows shows the small touch circle every time i touch.When I tap and hold a cue with one finger (for example blackout) and flash another cue with a second finger, all taps gets registered by M-Pc.
It seems to be a tap filter, or a limit of taps per second for one finger hits.
How can I solve this?Thanks
Cedric
Posts: 1
Participants: 1
↧
↧
Unlinking pan and tilt
@Kevin_Friddell wrote:
In my efforts to make utility presets I have tried unlinking pan and tilt. For some reason I can not get it to work. Is there a trick I am missing?
Posts: 1
Participants: 1
↧
Delaying Fixtures in a Chase Cuelist
@kyle.macintire wrote:
I have multiple lights that are all individually addressed and I am creating a chase cuelist to shuffle through about 5-6 colors. How do I get the lights to delay so that a certain defined number of them are going to the next cue before the rest? I know you can delay using timing in the FX generator but how would you create this same wave effect in a chase cuelist?
Posts: 2
Participants: 2
↧
Applying fx speed to a playback fader
@Jcaleb wrote:
Is there a way to apply the “fx speed” encoder to a fader? I’d like to have a strobe override that increases in speed as the fader travels to 100%. What could I use to achieve this? I’m thinking cue-blender with 100 cues, one cue per % of the fader. Wanted to know if I’m going around my elbow to get to my ass.
Posts: 3
Participants: 3
↧
M-PC Create strobe and all white with priority over programmer
@Diems wrote:
Hello All,
As I like using the programmer live to select fixtures and presets, I'm looking for a way to create a button (cue whatever) using MPCTools to strobe and output all white. The problem is that if I have any color selected using a preset, Intensity and strobe parameters will work but the color will not go to white. It stays the color as set in the preset. Would there be any way to get the color which is set in the cue to override the programmer preset color?
Thanks,
Posts: 1
Participants: 1
↧
↧
M-PC and M-Touch connection loss
@ANTLighting wrote:
Alright, this happened to me 4 times last night during a show mind you!! Running M-PC 3.60 (have to upgrade I am aware. Anyways during the show I would lose 100% control of the fixtures whether it was the touchscreen laptop or the M-Touch. I could touch it all but no response. I would have to exit M-PC and restart it to gain control. Luckily I did it like it was a "special effect lighting" for the band. Could it be the laptop needs Windows updating? I do try ro keep it up to date. Any suggestions are welcome.
Thanks Andrea
Posts: 4
Participants: 2
↧
MPCTools: APC40MKII mode2 encoder knob led feedback
@Diems wrote:
Is there any way to get led feedback from the encoder knobs when rotating on the APC40 mkII in mode 2 ?
Posts: 1
Participants: 1
↧
Fixture library editor
@Leon wrote:
So I am trying to make a fixture in fixture library editor , and this is the fixture :
I made fixture but problem is that I can't separate sections. In mpc I can only see full fixture .
To make it more clear I am uploading picture of American DJ mega tri bar, 12 channel mode with 3 sections , so that you can see what I want to achieve. I open American DJ mega tri bar in fixture editor but couldn't see option for sections.
I know I can request fixture from Martin but I want to make it on my own if possible .
Posts: 2
Participants: 2
↧