@barnumflight wrote:
So I have these elation zw37 washes on a show I am running. Everything works fine except for color. I see the color paremeters under .2 for the fixture but as I change it no result on the actual fixture. Anyone else run these and have any tricks? Software is current as of two weeks ago.
Tony
Posts: 4
Participants: 2
@holywoodpower wrote:
Hi everyone,
I've been working on this today and I thought it will be great to do a tutorial on how to connect WYSIWYG to M-PC, so there it isBTW, I'm new to this forum so I hope I created this topic under the right section...
Have a nice day
Thomas
How to connect M-PC to WYSIWYG.pdf (1.5 MB)
Posts: 2
Participants: 2
@Kimarius wrote:
I'm struggling with making my presetwindows to one or two rows on the y-axis.
Is it impossible to make it smaller than three rows, or am i doing something wrong?
Posts: 2
Participants: 2
@DrBluesVJ wrote:
There is lack of information how to achieve synchro M-PC by M-Sync,
so I describe what I've done, please help, what I did wrong?
I recorded SMPTE /LTC/ timecode signal as wav in Cubase DAW.
File sounds like timecode, waveform looks correctly.
I use another PC to generating audio SMPTE signal to M-PC workstation.
I connected audio output from DAW to XLR input in M-Sync.
I connected M-Sync to USB. Red LED is ON.
In Device's Manager in Windows I can see M-Sync works correctly.
There is no any settings in M-PC Menu about M-Sync or Timecode.
When wav playback is going on, green LED turns ON.
If I give signal with too low level it turns off, if I give too high level it also turns off.
So I set audio level in the middle. Green LED is ON stable.
My file with timecode is running...
I put Timecode Window on M-PC screen. Yellow display is still 00:00:00:00.
I've created TIMECODE Cuelist according to Help description with example Cues.
It doesn't work.
Is anywhere in M-PC monitor which displays incoming Timecode value?
How to check if incoming signal is correct?
Does this Green LED near XLR M-Sync input is reliable and ultimate indicator?
Should this Yellow Timecode display /one of M-PC window/
still follow incoming timecode as obvious numeric indicator as I expected?
Where can I find any information how to set up and use M-Sync with M-PC?
There is no manual, no information in M-PC Help, no You Tube tutorial...
Please help!!!!!!
Posts: 7
Participants: 2
@jacob.means wrote:
I am having trouble making some 2 color fx macros on the Martin Mtouch, and MPC, can anyone guide me through it?
I want to make some similar to the ones that come pre-made with the program, I have checked other forum posts, videos, and the support page, and it's not exactly making sense to me.
Posts: 2
Participants: 2
@McLightingGuy wrote:
Like the title says, is it possible to use MSD with Hog 4 PC?
Posts: 1
Participants: 1
@DrBluesVJ wrote:
It will be very convenient - if will be possible to change not only positions and sizes of screens layout windows, but in the case of windows with rectangle buttons /Presets, Cuelist directory, Play buttons.../ also to change by user sizes of those rectangle buttons.
Now sizes are automatic - like rubber - very easy to set up, but not very convenient in some cases during everyday use.
Description of buttons sometimes dissapeares /when "automatic" buttons sizes are too small/ or sometimes buttons are too large
/in the case I would to see more of them on screen/.
Maybe it will be worth to apply user controlled options
for setting button sizes?
Posts: 1
Participants: 1
@Tuna wrote:
Hello,
I'm dealing with the issue on Martin M1 console from the video for a while.
When I want to assign function to a flash button or fader I can't do
that because "Function assignments" tab is disabled. Is the problem due
to software or what? Also, I tried to clear cue, release all, restarting
console and so on. Main thing is that it works once (randomly) in like
30 times. Anyone ran into same issue? Video can be seen on this URL: https://drive.google.com/open?id=0B11kw-okBHhoWThNZjlMN3hleDAThanks.
Posts: 5
Participants: 4
@WouterVerlinden wrote:
Hi,
we have just released version 4.2.2 of the P3 System Controller software.
Best Regards,
Wouter Verlinden
Product Manager - LED Video
Posts: 1
Participants: 1
@kram106 wrote:
I have connected the M-Touch to the M2GO and am able to control 2 different playback banks. Now I want to know if it is possible to display the second active bank for the M-Touch on screen.
Posts: 2
Participants: 2
@Jeremy_Baker wrote:
When attempting to modify submaster wing button behavior (on latest release) if you edit from the selected cuelist page > options... you can click function assignments and change it to flash, toggle, etc.
If you attempt to modify this behavior directly from right clicking active cuelist... you CANNOT choose the function assignment page.
this seems to be a bug.
Posts: 3
Participants: 3
@DMX512 wrote:
so iv noticed something weird today. I had 14 of my 700s parked and when I lamped on "entire system" the parked fixtures where striked as well. I am aware that's there is away around this by selecting groups or fixture individually. My question is has anyone else had these issues?
Posts: 3
Participants: 2
@Djnu wrote:
Hey guys,
I've bought some showtec Sunstrips, they patch in to mpc as a standard dimmer then I got to use the FX to make the effects. Has anyone done any cool effects with these, if so if you can share.
Posts: 3
Participants: 2
@sylvavio wrote:
Hi all,
I've noticed that LAUNCHPAD S mididevice description says something like :
"The Status Byte and Note is already pre-set for each button. The user just needs to enter the velocity to set button color. "
What does it mean ? How do I get led feedback from PLAYBACK BUTTONS depending of there nature and status?
I've found a workaround via MAIN PLAYBACK. But if it's possible with PLAYBACK BUTTONS I am much interessed!Thanks
Posts: 3
Participants: 3
@seblugthart wrote:
It would be nice if you can disable the playbacknumber of the button for a much cleaner view. So the unused buttons are totaly black.
Posts: 1
Participants: 1
@AmandioTCosta wrote:
Hi guys,
Can anyone tell me why in Windows 7 Ultimate, M Touch and M DMX do not work properly? Gives error in the installation of drives and DMX outputs are not enabled!
I tested on 2 different notebook and both gave the same issue!
Many thanks!
Posts: 7
Participants: 3
@Eharrison wrote:
I've made a color chase and I would like to add it to a cuelist. I thought I could just make the cue then make the chase and merge it into the cue. I guess not. Help please.
Posts: 3
Participants: 3
@Eharrison wrote:
I have some American DJ Inno Scan LEDs and they do split colors. The fixture profile show that it's there but I only get solid colors. It's like the channel needs to be edited in the profile. Is there a way for me to update it or do I need to contact Martin?
Posts: 3
Participants: 3
@Jos wrote:
hi guys! i'm sure its an easy issue to solve but i cant find a way... at first, when i was programming in mpc with my m-touch , i was able to record everything in the 10 buttons on the side of the board. when i do that, for an override when i click on it the cue its start and when i dont click on it it goes of..... now with the new firmware and software update, when i repeat the same thing the color of the button is a pale green and when i click on it ( let say it's a strobe as an override) nothing happen.... do i miss something ? maybe its a new parameter i have to enable in the settings? am i the only one that dont understand ? thank you in advence
Posts: 2
Participants: 2
@Kyle wrote:
I am going to purchase an Ether2DMX8 to expand M-PC. Here are a few questions that I have.
1 - Do I need to purchase a license with it or is it built into the hardware (i.e. will I have 8 universes available when I get it set up?)
2 - What does the set up look like? is it as simple as taking cat 5 out of the computer and sending it to the Ether2DMX8?
3 - If i need to also use the ethernet port on the computer for network as well can I take the network and the Ether2DMX8 into a switch and then to the computer to allow both to work at the same time?
Thanks for the help.
Posts: 3
Participants: 2
