@mzagarn wrote:
I have a show file which I am working on. When I try to move it to my laptop to show a client onsite. it fails to load. I can load it in the paper module but not in the 3d viz. I have also copied it and compacted the scene with the compacter but that also didn't work. Could it be because that all the models or textures aren't in the same locations? Is there away to export them all to a folder? Please let me know. cheers. mike.
Posts: 11
Participants: 4
@Antonio_Llorens_Cano wrote:
Hello,
I'm Antonio Llorens, a light technician, I'm making a show with M series M-PC and the DMX case ENTTEC USB PRO
the fixtures are pached, I can see in DMX layout windows the information DMX is sending.
The program can see my ENTTEC box and is active, but nothing is working, I've tested the ENTTEC BOX with another software and work well.Anyone know what can be the problem?
thankyou very much.
Posts: 5
Participants: 3
@Benerman wrote:
Trying to install and run 3.52.718
Used clean up tool and uninstalled absolutely everything Martin. Ran it as administrator too.
Windows 10 anniversary - 64 bit - updated from windows 8 or 8.1
Tried renaming the "before..." show files to ensure it's not a corrupt show file.
Any other advice?
Posts: 4
Participants: 3
@hkmorgan1987 wrote:
Ricardo,
I would like the ability to turn off the Bank notifications that MPC Tools generates. They can rather obtrusive at times. Other ideas might be to make them smaller, or change position to a corner of the screen.Another idea is to implement a snapshot and allow a file to be saved/loaded that recalls all of the settings from Midi, Joystick, and the Keyboard shortcuts.
Posts: 1
Participants: 1
@wadshrad wrote:
Does anyone know the options for third party control of P3?
In the past we have sent DMX commands form third party controllers to Light Jockey and M-PC to recall scenes etc.
Is it possible to send UDP commands to P3-PC to do similar? Is there and API as such?
Thanks in advance.
Wade
Posts: 1
Participants: 1
@Jeroen wrote:
Hi ,
after this topic: http://forum.martin.com/t/set-chase-speed-through-midi-controller/1167/6
It would be great if it would be possible to link the bpm controls to playbacks. So we can control it more direct with our MIDI controller.
The tap-button is already assignable, but it would be great if the other controls are also accessible. Especially the "speed-half" and "speed-double" buttons are great!Thanks!
Posts: 1
Participants: 1
@Jeroen wrote:
Hey,
I just made a minor adjustment in a fixture profile that is already programmed in my show. Can I replace this one with the updated version? The change was a channel used to be snap, now is fade.
Thanks!
Posts: 2
Participants: 2
@Benerman wrote:
Posted earlier about having issues with M-PC Crashing, stating that "MX Manager has stopped working" Well I just re-installed the OS and now upon the initial installation of M-PC I got a pop up stating that the Jungo driver was not a verified digital signature driver. Now in the device manager the Jungo Connectivity section has yellow warning signs as they are not installed correctly(Code 52) LAME Microsoft.
So now I have a working M-PC but doesn't recognize M-DMX Duo Dongle = No DMX Output.
I have tried disabling the driver signature enforcement then trying to install USB Tools with no luck.
Please Advise.
Posts: 2
Participants: 2
@Poti_Campelo wrote:
Is there any way to place a image file (.jpg .bmp...) in the playback buttons?
Posts: 3
Participants: 2
@Kimarius wrote:
I'm using the Touch Panel in MxManager a lot, and I really need feature that let me put buttons into more than one group.
Example:
If I have a section with "Disco-effects" running, that contains information from both of the fixturetypes in my system, and I have two sections of buttons that control these fixtures individually.
I want both these sections to release the section with the "Disco-effects", but I do not want them to release each other.This is something I really need to keep my customers satisfied, and something they keep asking me about a lot. If there's a workaround, I'd really like to know
Posts: 2
Participants: 1
@ricdays wrote:
Hello,
I have created a repo to host all community files related with MPCTools: MIDI devices files, LUA scripts, etc. Also, the Wiki will include relevant information and tutorials.
Please follow this link: https://bitbucket.org/ricdays/mpctools-support
Just like any repo, you can create a pull request to add files to it.
Best regards,
Ricardo Dias
Posts: 2
Participants: 1
@PaulPelletier wrote:
You lost your One-Key?
It was stolen?
It broke?Don't panic, there's a solution.
Is the key registered on the Codemeter website at: https://my.codemeter.com/ ?
- Please log in there and declare the key as lost.
- Once this is done, you can send us a confirmation from the website of WIBU (Codemeter)If the key is not registered:
- The first step is to find the backup of the license so it can get blocked by WIBU, the key manufacturer
- On Win7-8,10 the file should be found here: C:\ProgramData\CodeMeter\Backup (it has a WBB extension and the latest file is the best one)
- To access this folder you may have to change the Windows Folder Options to allow for hidden files to be seen.
- Send us this file so we can block the key.Next you need to purchase a P/N 90703000 Demo Martin One-Key (Trial version only of LJ, M-PC and MSD 6) from your local Martin distributor.
Once you receive the new One-Key, you can send us a license request via a context file, and we will issue a new full license.
Include the proof of purchase as well
All instruction are in the PDF.P.S. Register your new key https://my.codemeter.com/
This way it can be blocked in case of lost or theft.
Posts: 3
Participants: 1
@jacob.means wrote:
I am attempting to create an effect macro with a step from red (RGBW: 100,0,0,0), to white (RGBW: 100,100,50,1000), to blue (RGBW: 0,0,100,0), but I am running into issues, with the Martin MPC program, using a Martin M-Touch. Would anyone be able to walk me through the process? I want to use it in a timecode, and have the macro be the base, in each cue, with different modes, speeds, etc. for each cue. I've tried modifying it as a chase, but that just isn't working for my purposes.
Posts: 1
Participants: 1
@djneekz wrote:
Hey all, I'm new so bare with me.
I have my pan, tilt, and speed options made available to me on my martin m-touch as overrides. They work perfectly, except for when I try to trigger different positions. Any idea what the problem might be and how I could fix it?
Thanks
Posts: 4
Participants: 2
@disco-daddy wrote:
he guys,
has anyone here m-pc and resolume the start?
I feel just about the CITP stream. works with someone?resolume works fine with m-pc. only the stream works over syphon and citp tool.
i see the kmt syphon streamer in m-pc citp page. its only offline.
hmmmm???
Posts: 5
Participants: 2
@dany.giguere wrote:
Would be nice to have bpm sync fx. Also would be cool to have 1/8 1/4 1/2 for multiplier.
Would be awsome if we can create offline fx with 2d plan playback. So we could create fx during the evening in use it during show.
Posts: 1
Participants: 1
@EdKaz wrote:
I have a 10 of these fixtures and using m-pc or lightjockey. The problem I am having is running the pre-installed macros. Is there a way to have ALL fixtures do the same thing (color-movement)? Whenever a macro is selected the fixtures each do their own thing in SOUND mode regardless of menu setting on fixture ! It looks like a cheap disco ? Love the master/slave mode but need to turn off fixtures (dmx). Tried using same dmx address , but still act independently ! I am doing a large ufc event and only wanted these fixtures for the ring girls. Is there anyone that sells programmed shows for mpc for this fixture? Also only using one universe must I use 45 channels (no choice in profile).
Thank you for any help
Ed
Posts: 1
Participants: 1
@barnumflight wrote:
Just upgraded the firmware on my mtouch. I notice that I can not change between diffrent paremeters using the m touch. For example I cannot go from Intensity to beam without using the mouse on screen. I used to be able to do that using the m touch. Is there a toggle button I need to be using?
Tony
Posts: 4
Participants: 2
@Riccardo_Mosele wrote:
I have two chrome beam 250 and other lights are not in the lights of the software ... how can I do? with other programs could create them. here you can not, how do you know?
thanks Riccardo
Posts: 3
Participants: 3
@Wusa wrote:
Hey,
Sorry i guess im just to stupid. I dont really understand the layout of the buttons for the M-Play. I have trouble finding the right words for my question so ill ask with a picture. Where are the buttons marked with a "?". And what can they be used for and what not.
Thanks!
Posts: 5
Participants: 2
