Error 1720 !
@Richard_van_der_Meer wrote: I keep on getting error 1720 on a fresh windows 10 laptop. runned as admin turned off firewall virus scan Posts: 8 Participants: 3 Read full topic
View ArticleClik here to view.
Can't register Martin Lightjockey 2
@Kasper_Mathiesen wrote: Hey there. I just bought a used, but original Martin Lightjockey 2 one key and DMX box (this one:...
View ArticleGrand Master on M Touch
@greendoor wrote: Not sure there is any way to do this currently, but for me it would be really useful to be able to map the Grand Master fader onto the M Touch somewhere. I can achieve the same thing...
View ArticleButtons colors of the M-Touch
@LEIDA wrote: HyeIn MPC, i've set my cuelist so that the forcetouch button (the one under the fader) is the GO.the 2 buttons on the top are respectively Flash and Release.Is it normal that when i...
View ArticleSimple LED Look
@McLightingGuy wrote: I'm trying to create a simple static look with a line of, lets say 20 LEDs, where they start with one color on stage right become a different color around center stage and then...
View ArticleQuestion about modifying the intensity of an override.
@Action_Joe wrote: Recently we were doing lights for a dirt rave where we were lighting up the front of a wooden shack with a mix of conventional and led fixtures... well we created an over ride that...
View ArticlePlayback fader 6 is wonky on my m-touch
@Action_Joe wrote: It seems as though there are particular cuelists, (we've noticed this with submasters and overrides in particular) that don't behave properly and the touch faders will spaz out and...
View ArticleM-PC Hangs on Live Output Start Up
@visualvoodoo wrote: Hi there,I am in the process of setting up an M-PC setup for a theatre and we created nice new panel layouts etc for a twin screen set up.Now when we try and start the program it...
View ArticleStop the fx
@Jon_Eirik_Sira wrote: MA user new the m-touch. In MA I stop the FX by STOMP. How do I STOMP the FX in a que? Posts: 2 Participants: 2 Read full topic
View ArticleOnly 10 F# Buttons?
@visualvoodoo wrote: Hey there folks,I am using a Hog1000 to trigger everything in M-PC. So far so good, however just wondering why there is only 10 F# Buttons to access when there is pretty much...
View ArticleFader for variable effect speed.
@barnumflight wrote: I thought this was covered in the old fourm but can't find it. I want to use a fader to control the speed of rotation. So in the master cue list I have the fixtures with the gobo...
View ArticleJumpy encoder wheels
@barnumflight wrote: Today is just full of questions. I have had my m2go for a while (and worked for the previous owner so I have had it since new) and the encoder wheels seem to "jump" back when...
View ArticleConsole Update - Fixture Library/OS/Firmware/Software
@MMSTom wrote: We recently purchased a second M2Go console and were trying to update the fixture library. Unfortunately whenever I plugged in a USB drive with the newest update the console seemed...
View ArticleArkaos CITP
@aschaefer wrote: I'm trying to get Arkaos to work on my M6. I have everything patched correctly and I have control of the Arkaos software, I just can't get my CITP to work properly. In the 'Network...
View ArticleWork around for fader assignment similar to MA
@mattsmithadelaide wrote: Hi there, Currently have 8x101 8x250 in a venue and trying to use a fader (Fader 1) as my overall intensity effects for all lights. Currently I have Cue 1: All on (no fx...
View ArticleClik here to view.
Remove FX parameters from cue
@Jeroen wrote: Hello, i created some cues but somehow some FX values became recorded as well into that cue. I can't get them out of the cue. Tried clearing all channels but it won't work. See the...
View ArticleScreen view showing follow timing in cuelist
@Jpullen wrote: Is there a screen view that shows the counting down of an follow or wait cue in a cue list? Posts: 4 Participants: 2 Read full topic
View ArticleM-PC crashes on load
@Allan_Belcher wrote: When I start up M-pc it gets as far as Loading Starting CueList and then crashes with a Martin MX Controller has stopped working error.This happened on 3.50 and when I upgraded...
View ArticleVersion2.7 build3: Master intensity - how to "master fade" 3 channel RGB's...
@doppler wrote: Referring to LJ version 2.7 build 3 on windows xp. I have a large amount of 3 channel RGB fittings with no channel for intensity. I want to use a master fader but the 'Master...
View ArticleClik here to view.
Multiply /block/ selection for MOVE function.
@DrBluesVJ wrote: Hi Everybody During (pre)programming the show you create many Presets, Cuelists and so on. You create more and more of them...For better and more efficient work organisation and...
View Article