Clik here to view.
No DMX, but lights are on? Help
@ClintonTheDJ wrote: Hello everyone, I have an older light jockey dongle. The DMX seems to have stopped working, but all the lights say other wise. Could it be repaired? Any ideas would be great....
View ArticleClik here to view.
OSC Button Codes
@albertosgr wrote: Hi all. I'm starting to experiment with touchOSC and I tried to create my custom template. I can't really find the codes (or paths) for the buttons and labels in the right side of...
View Article2D plan and multi-part fixtures
@Jason_Ellemor wrote: Hi All,Looking for some ideas/ experience when using multi-part fixtures on the 2D plan. I'd previously made a view with 40 VC Grids and it was pretty fiddly... Now working a...
View ArticleClik here to view.
LOAD command also includes any FX paramaters
@Jason_Ellemor wrote: the Load command only loads static values from the source fixture. If running an FX parameter, this doesn't seem to be "copied" across with the load command... Please can we have...
View ArticleNetwork Ports
@Barry_Fritz wrote: We are trying to connect our M2Go and M1 to the campus network in order to use remote control of the consoles via an I-pad. We are able to ping both consoles but are unable to...
View ArticleSuggestion
@miketluu wrote: Can you add a feature so that anytime i record on a cuelist it replaces that single cue? instead of me typing record cue 1 enter Posts: 6 Participants: 4 Read full topic
View ArticleClik here to view.
Light Jockey Boxes - Which ones work with M-PC
@Cody_Lanoue wrote: I have a very old Light Jockey dongle. it does NOT use a One Key. I thought I read that if I install M-PC the drivers will make it so Light Jockey doesn't work. I'm Running Windows...
View ArticleHow do professionals create amazing light shows to songs?
@theman wrote: How do they make those amazing light shows? Do they make it all ready on one cue and then push go and it runs the entire song? Or do they do it all live? I'm just trying to learn how...
View ArticleRDM limited to 16 universes?
@Jason_Ellemor wrote: Is the RDM discovery limited to 16 universes? Can't seem to detect any fixtures in universes > 16 Posts: 1 Participants: 1 Read full topic
View ArticleEther2dmx8
@dawsfactor wrote: i was just wondering if there was a way for this to read UDP commands? Posts: 1 Participants: 1 Read full topic
View ArticleClik here to view.
KAM Ghost profile
@Grajay wrote: Having looked through the profile updates i dont see the KAM ghost (mirror Ball effect) profile listed for LJ2. furthermore i cant find the submit profile request which used to be on...
View ArticleClicking profile Setup takes a long time to load
@Grajay wrote: When i want to configure a new fixture if i click on the setup configuration button it can take up to 4 minutes to load the fixture configuration screen, often my screen goes dim and i...
View ArticleEther2DMX8
@Tyson_G wrote: Hi everyone, Using the Ether2dmx8 I was just wanting to know if when saving cues to it and setting linked cues with times is it normal to have to reboot the ether2dmx8 to get the cues...
View ArticleLooking for Electroconcept Profile 75 fixture
@LEIDA wrote: HyeI'm looking for this fixture, if someone has it, or maybe a similar fixture definition (15 or 19 dmw channels) ?Thanks by advanceEric Posts: 4 Participants: 3 Read full topic
View ArticleLJ Fixture Library update 02.08.2016
@PaulPelletier wrote: Hello folks, New LJ library package (02.08.2016) has been posted online:https://martinprofessional.box.com/v/LightJockeyProfiles Regards,Ofer BrumMartin fixture library support...
View ArticlePan/tilt offset for aiming after mounting change
@GRsound wrote: Hello, is it possible to set an offset on pan/tilt after i´ve done an new mounting set up with for example beam moving heads? Because one spot is to hight, another to low.. an the...
View ArticleClik here to view.
Lightjockey 2.95 can drive a lasershow software?
@Barabba wrote: Hi! Thank you for supporting me Well, since I'm using 2.95 for driving lights in club and I'm planning to buy a laser I would evaluate the best choice, I can buy a laser with DMX...
View ArticleProblems with recording cues
@David_McMillan wrote: For some reason I mpc is not letting me record more cues than one into a list. Also, it's not letting me save some of the things I program when I do start a new cue list. Posts:...
View ArticleArtnet, pvp
@disturbinglee wrote: Does anyone know how to control pvp from MPC via artnet? I can't get it to recognize the artnet device. Thank-you Posts: 8 Participants: 4 Read full topic
View ArticleInvert channel values in patched fixtures
@Matt_Shores wrote: Hello friends!I am new to Martin desks and I am using their Martin-M touch. I need to invert the intensity channel of a live patched fixture. Does anyone know how to access and...
View Article