@lanaya77 wrote:
I have some RGB and RGBW silm par fixtures that has the RGB/W color saturation at 100% when I select them to create an intensity preset, so I have create a submaster fader for the intensity on those fixtures are always on when my intensity fader is at 100% even if not any play cue is active. so the only way to bring those fixtures light down when nothing is active is bringing the intensity fader to 0%.
What I have to do on the fixture editor to make those color saturations start at 0% ?
The rest of my fixtures are ok and I have compared the fixture parameters and they looks to be similar.NOTE: Two fixtures are Venue RGB ThinPar 64 and I am using it with with 7CH. mode in the fixture itself and on MPC
Ten fixtures are cheap generic RGBW Flat SlimPar Quad 7 and I'm using them with 8CH mode on both ends fixture and Software.
Posts: 2
Participants: 2