@DrBluesVJ wrote:
There is lack of information how to achieve synchro M-PC by M-Sync,
so I describe what I've done, please help, what I did wrong?
I recorded SMPTE /LTC/ timecode signal as wav in Cubase DAW.
File sounds like timecode, waveform looks correctly.
I use another PC to generating audio SMPTE signal to M-PC workstation.
I connected audio output from DAW to XLR input in M-Sync.
I connected M-Sync to USB. Red LED is ON.
In Device's Manager in Windows I can see M-Sync works correctly.
There is no any settings in M-PC Menu about M-Sync or Timecode.
When wav playback is going on, green LED turns ON.
If I give signal with too low level it turns off, if I give too high level it also turns off.
So I set audio level in the middle. Green LED is ON stable.
My file with timecode is running...
I put Timecode Window on M-PC screen. Yellow display is still 00:00:00:00.
I've created TIMECODE Cuelist according to Help description with example Cues.
It doesn't work.
Is anywhere in M-PC monitor which displays incoming Timecode value?
How to check if incoming signal is correct?
Does this Green LED near XLR M-Sync input is reliable and ultimate indicator?
Should this Yellow Timecode display /one of M-PC window/
still follow incoming timecode as obvious numeric indicator as I expected?
Where can I find any information how to set up and use M-Sync with M-PC?
There is no manual, no information in M-PC Help, no You Tube tutorial...
Please help!!!!!!
Posts: 7
Participants: 2