APCMini Setting to change pads and button colours

@GDW wrote:

Hi All

Sorry if this has been asked before. I have tried to find info with no luck on setting up of the APC mini with MPC tools. I have got to the point where I can control the cues from the main playback and playback page 1. I have set the 64 pads to trigger the cues on page 1 of the playback, the faders control the main pages cues or overrides on all banks. The 8 buttons on the side are set too release all, clear, record, update, enter, etc, That all works well not problems what so ever.

Basically I would like to have it so that when the cue is active the pads go green when deactivated goes red. I have changed the settings under advance in MPC Tools to the colours that I want.

I know that I am getting feed back as when I program a look or cue the button that is set to clear function does flash.

Current settings for the pads are as follows;

MPC tools Pad 1 = Bank 1 Playback 71, Action Toggle
MPC = Down action - Go Up action - nothing

Thanking you in advance

Posts: 3

Participants: 2

Read full topic